AIRAC News
AIRAC 2102/01Dave Paton 2021-02-25 16:04:35 UTC
1. Updated CYPK_GND to the new format. Just have CYNJ_GND left to update. WIP.
2. Added TML Floor altitudes under ARTCC_LOW. This negates the need to use FreeText Labels to display TML floors.
3. Added ASP (Assigned Speed) to the DATA TAG. Left clicking on ASP (in the tag) allows you to assign a speed in Knots and right clicking allows you to assign a MACH number.
4. Adjusted DATA TAG colors (Symbology settings) to better display Non-concerned, Concerned and Assumed aircraft.
5. Updated all ASR's to display the correct DATA TAG family. Some ASR's were set to use the Built-in Matais family. All ASR's for TWR positions and below (including FSS will use the vrVFR TAG family and all positions above TWR will use the vrIFR family. GND ASR's still use the SMR plugin TAG.
6. Renamed all FSS ASR's from TWR to FSS. e.g. CYCD_TWR.asr is now CYCD_FSS.asr. They are located in the TWR_ASR folder.
7. Added TLM 2way VFR routes under the GEO section. You can see them when loading a TML.asr. The VFR stuff is still very much a WIP.
2. Added TML Floor altitudes under ARTCC_LOW. This negates the need to use FreeText Labels to display TML floors.
3. Added ASP (Assigned Speed) to the DATA TAG. Left clicking on ASP (in the tag) allows you to assign a speed in Knots and right clicking allows you to assign a MACH number.
4. Adjusted DATA TAG colors (Symbology settings) to better display Non-concerned, Concerned and Assumed aircraft.
5. Updated all ASR's to display the correct DATA TAG family. Some ASR's were set to use the Built-in Matais family. All ASR's for TWR positions and below (including FSS will use the vrVFR TAG family and all positions above TWR will use the vrIFR family. GND ASR's still use the SMR plugin TAG.
6. Renamed all FSS ASR's from TWR to FSS. e.g. CYCD_TWR.asr is now CYCD_FSS.asr. They are located in the TWR_ASR folder.
7. Added TLM 2way VFR routes under the GEO section. You can see them when loading a TML.asr. The VFR stuff is still very much a WIP.
AIRAC 2101/01Dave Paton 2021-01-28 21:40:08 UTC
1. Updated Prince George ground layout to the new format.
2. Updated CYXS_GND.asr and CYXS_TWR.asr
3. Added Castlegar Radio. CYCG_F_TWR freq 122.100. (Shares the same freq as CYCD_F_TWR so I'm not sure how this is going to work if CYCD_F_TWR and CYCG_F_TWR are online at the same time?)
4. Added CYCG_F_TWR.asr
5. Added Vancouver Outer Tower. CYVR_O_TWR freq 125.650. This is for VFR traffic and has no effect on IFR traffic. It is owned by CYVR_TWR if CYVR_O_TWR is not staffed. CYVR_TWR owns CYVR_N_TWR and CYVR_O_TWR when those positions are not staffed but CYVR_O_TWR and CYVR_N_TWR do not own CYVR_TWR if CYVR_TWR is not staffed.
6. Updated CYVR_TWR_26.asr and CYVR_TWR_08.asr
7. Fixed the GND split line showing when only CYVR_GND was staffed. It will still show when GND is split but only to ground controllers.
8. Added all VFR checkpoints that are on the Vancouver VTA. They can be selected through the Display/Freetext. Each VFR checkpoint has a corresponding fix associated with it. e.g. Coal Pyle VCPYL. All VFR fixes start with VC and are 5 character. The associated fix can be turned on in the Display/Fix.
9. I have created a .csv file called LittleNavMap_Vancouver_VFR_Checkpoints.csv that can be imported into Little Nav Map. The file is in the Plugins Folder. To import it, when in LNM, Click on Userpoints and select Import CSV, navigate to the file. This will show all VFR checkpoints and their associated fix name. You can also add them to your flight plan.
10. Updated vSMR to v1.5. This will allow you to add text to the A/C tag after they have landed. Right click on the bottom left of the tag to enter text. Make sure you overwrite your vSMR.dll and vSMR_Profiles.json files located in the plugins folder.
11. I have been experimenting with adding SIDs and STARs for VFR Arrivals and Departures. This is still very much a WIP. You can select a VFR dep or arr in the SID/STAR dropdown list. They are named after their corresponding FIX ID. e.g. HAIDA DEP is CVHDA. If there is a transition, for example Garry Point DEP Sandheads transition then it will be name after the departure fix with the transition attached. e.g. VCGAR-S. Unfortunately I can only give them a max 7 character name.
2. Updated CYXS_GND.asr and CYXS_TWR.asr
3. Added Castlegar Radio. CYCG_F_TWR freq 122.100. (Shares the same freq as CYCD_F_TWR so I'm not sure how this is going to work if CYCD_F_TWR and CYCG_F_TWR are online at the same time?)
4. Added CYCG_F_TWR.asr
5. Added Vancouver Outer Tower. CYVR_O_TWR freq 125.650. This is for VFR traffic and has no effect on IFR traffic. It is owned by CYVR_TWR if CYVR_O_TWR is not staffed. CYVR_TWR owns CYVR_N_TWR and CYVR_O_TWR when those positions are not staffed but CYVR_O_TWR and CYVR_N_TWR do not own CYVR_TWR if CYVR_TWR is not staffed.
6. Updated CYVR_TWR_26.asr and CYVR_TWR_08.asr
7. Fixed the GND split line showing when only CYVR_GND was staffed. It will still show when GND is split but only to ground controllers.
8. Added all VFR checkpoints that are on the Vancouver VTA. They can be selected through the Display/Freetext. Each VFR checkpoint has a corresponding fix associated with it. e.g. Coal Pyle VCPYL. All VFR fixes start with VC and are 5 character. The associated fix can be turned on in the Display/Fix.
9. I have created a .csv file called LittleNavMap_Vancouver_VFR_Checkpoints.csv that can be imported into Little Nav Map. The file is in the Plugins Folder. To import it, when in LNM, Click on Userpoints and select Import CSV, navigate to the file. This will show all VFR checkpoints and their associated fix name. You can also add them to your flight plan.
10. Updated vSMR to v1.5. This will allow you to add text to the A/C tag after they have landed. Right click on the bottom left of the tag to enter text. Make sure you overwrite your vSMR.dll and vSMR_Profiles.json files located in the plugins folder.
11. I have been experimenting with adding SIDs and STARs for VFR Arrivals and Departures. This is still very much a WIP. You can select a VFR dep or arr in the SID/STAR dropdown list. They are named after their corresponding FIX ID. e.g. HAIDA DEP is CVHDA. If there is a transition, for example Garry Point DEP Sandheads transition then it will be name after the departure fix with the transition attached. e.g. VCGAR-S. Unfortunately I can only give them a max 7 character name.
AIRAC 2014 and some flight service stationsBrad Crockett 2021-01-01 05:56:45 UTC
AIRAC 2014
We now have CZVR_F_CTR (Pacific Radio) Controls all MF zones when they are not owned. CYZT_F_TWR (Port Hardy Radio) Controls CYZT MF and CYAZ MF when CYAZ MF is not controlled. CYAZ_F_TWR (Also Port Hardy Radio) Controls CYAZ MF even if CYZT_F_TWR is online. ASRs for these positions added.
We now have CZVR_F_CTR (Pacific Radio) Controls all MF zones when they are not owned. CYZT_F_TWR (Port Hardy Radio) Controls CYZT MF and CYAZ MF when CYAZ MF is not controlled. CYAZ_F_TWR (Also Port Hardy Radio) Controls CYAZ MF even if CYZT_F_TWR is online. ASRs for these positions added.
AIRAC 2013 UpdatesBrad Crockett 2020-12-26 20:42:42 UTC
KBLI removed from terminal info line 3.
CYVR_I_APP is now CYVR_F_APP. When the update is released, you'll have to make sure to overwrite your "Login profiles.txt" file.
CYYJ_O_TWR added.
CYVR_I_APP is now CYVR_F_APP. When the update is released, you'll have to make sure to overwrite your "Login profiles.txt" file.
CYYJ_O_TWR added.
AIRAC 2013Dave Rose 2020-12-05 15:37:06 UTC
AIRAC 2013
2012 New Ground FileBrad Crockett 2020-11-14 17:43:22 UTC
2012 New Ground File
AIRAC 2012, new airspace revisions by David PatonBrad Crockett 2020-11-09 20:42:00 UTC
AIRAC 2012, new airspace revisions by David Paton
AIRAC 2011Brad Crockett 2020-10-11 15:26:47 UTC
AIRAC 2011
AIRAC 2010 E_CTR freq updateBrad Crockett 2020-09-26 19:40:16 UTC
AIRAC 2010, changed E_CTR frequency from 133.600 to 125.950.
AIRAC 2010Brad Crockett 2020-09-19 19:29:22 UTC
AIRAC 2010